Finger Lakes

We left Niagara Falls on a Sunday so we got caught in the line up for the dump. Note to self: check out on Mondays or Tuesdays or… From Niagara we headed for the Finger Lakes. Trying to avoid tolls (common on the interstates out east), our GPS wound us up and down hills on bumpy backroads criss-crossing the countryside. It was scenic for me, but for Chuck it was not so much fun.

IMG_2922

Still it was sunny when we arrived at Keuka Lake State Park to find a nicely maintained campground on the hillside above the lake. Again we had to park on the grass (what’s with that here in the Northeast?) but there seemed to be a bit of gravel underneath on one side so we aimed for that. We set up and sat down to enjoy the sunshine in our large private site. It was a good thing because when the rain moved in the next day the rest of our campsite quickly became a puddle and we weren’t sitting outside anymore. 😦

On one of the nicer days we headed for Watkins Glen about 40 minutes away. This natural gorge has 19 waterfalls along the 1.5 mile trail. It was beautiful and I kinda wished we could go back and walk it all again another day.

The area is known for wine tasting and with over 200 wineries in the Finger Lakes region trying to decide where to go was daunting. I read a couple of wine trail brochures and a Fodor’s article and settled on a few of the wineries on nearby Seneca Lake.

IMG_2999

Our first stop at Anthony Road was disappointing. The grounds were beautiful, there was even an old Airstream behind the barn, but the place felt sterile. They had a small gallery and a beautiful porch overlooking the lake but it was so quiet in the tasting room that sound echoed in the building.

IMG_3003

There was no friendly welcome but still we bellied up to the nearly empty tasting bar and plunked down our $5 (different from wineries we’ve been to in other places everywhere here charges $5 for a tasting flight which sometimes you get to chose and sometimes you don’t). The gal behind the counter offered little chatter beyond the description of the wines, even when we tried to strike up a friendly conversation. She’d pour one wine, give us the rehearsed spiel about it’s characteristics then turn her back to stare out at the lake. Oh well, they did at least have a decent Pinot Gris.

IMG_3004
Hard to see, but there is a cool silver hawk at the top right of the rusty tree.

IMG_3005

The next stop was a much smaller winery, not on the official “tasting trail” (with over 200 wineries in this region only some pay to be in the tasting trail brochures). Here we were greeted warmly, and as we tasted our wines, we had a friendly chat about our travels. I think Red Tail Ridge probably ended up being our favorite stop.

IMG_3006
All the wineries had cool metalwork like this gate at Fox Run.

Our third stop was another major winery but this one was friendlier than our first. At Fox Run we discovered a new wine called Arctic Run. How could we resist the blue bottle? This region is know for it’s Dry Rieslings and while they were ok most of them weren’t what we wanted, but this blended white table wine said it went well with guacamole and chips. Wow that’s right up our alley!

IMG_0225

By now we were both kinda tasted out, but stopped at Three Brothers since they had a brewery as well. This place was interesting just for the decor. We opted not to taste but instead bought an IPA and some root beer to take home with us which both turned out to be pretty good.

The Finger Lakes area has a large population of Amish and Mennonite families. We saw several horse and buggies clopping along the side of the road. One day I stopped at Oak Hill Bulk Foods, a Mennonite store to marvel at the huge selection of items packed in little bags. From hundreds of candies to flours, pudding mix, oats, pretzels, nuts, pasta, spices and more, they had it all. But the most amazing thing were hidden in little white bags near the register–fry pies! Oh man, these things were amazing!

IMG_0201

I opted for cherry with cream cheese and black raspberry. When I got back and we ate them we couldn’t believe how delicious they were. They took us back to those Hostess pies of our youth, only so much better! Needless to say we made another stop to get more before we left town and I’m actually thinking of going back later in the summer. It just might be feasible since we need to return to Ohio for some warranty work the first of September. Hmm, if I route it right… 🙂

IMG_0197

Chuck had some decent weather to try out his new toy and got a great shot of our solar installation. Should be fun to get some arial shots of the places we visit.

DCIM100MEDIADJI_0013.JPG

Next we head to the Adirondacks and then to south Lake Champlain for the 4th of July. Then we have a week in Vermont with a visit to Ben and Jerry’s before heading to the coast of Maine and up to Acadia for our next National Park.

Jackson Center of the Universe

Imagine 135 Airstreams gathered amidst the hustle and bustle of the working Airstream factory. Throw in some BBQs, seminars, factory tours, music, happy hour prize drawings and you have Alumapalooza, a fun filled week of all things Airstream. Held every year at the mothership in Jackson Center, Ohio (this was the 8th one) this rally is one of the biggies for Airstream owners and it’s been on our bucket list for a while. We weren’t sure what to expect, but ended up having a great time.

IMG_4444
Are we there yet? Getting close…
IMG_3522
Definitely close…

We arrived Saturday of Memorial Day weekend for the “early bird” parking. This not only meant we didn’t have to fight the Memorial Day camping crowds, but it positioned us near the front of the field and gave us some time to settle in before the event began.

IMG_2499
Soon that field will be covered with Airstreams!

The organizers have this thing down. You are directed into your spot by volunteers who line up the shiny trailers in perfect rows, and while the field was a bit muddy we had no problems since our spot was level and slightly elevated. Our neighbors weren’t so lucky as their leveling blocks kept sinking into the mud. They said a few years ago it was so muddy they had to get tractors to pull the trailers out of the field at the end of the week. While we were treated to some heavy thunderstorms on Saturday and Sunday nights, for the most part we had beautiful, albeit windy, weather the whole week and didn’t have that problem. Thanks goodness!

On Sunday we drove to nearby Dayton to visit the Dayton Aviation Historical Park. This site recounts the early days of Orville and Wilbur Wright in some of the very places where they worked, including one their bike shops (their shop had five different locations over time and one is preserved here). It was fascinating, especially since we plan to visit Kitty Hawk in the fall.

I loved the fact that they got their mechanical aptitude from their mother who invented toys for her children and things to help with the housework. Having attended college, unusual for a women of her time, she encouraged the boys in their intellectual interests and fostered an environment where their curiosity led to investigation. Later, this served them well as they would request information from the government on aeronautics and used models to test ideas for their airplane. The museum showed how important their bike building and repair were to their eventual success in flying too. Many of the parts on their airplane were modified bicycle parts.

Back in Jackson Center trailers kept arriving. By Tuesday, the official arrival day,  the field was full. It was fun to see all that shiny metal and we took walks through the field eyeing all the different models.

IMG_2643
Lots of shiny trailers reflecting the setting sun!
IMG_2535
An older model polished into a shiny beauty!
IMG_2570
If we had a motorhome it would have to be one of these, just like the Astronauts used!

As with any of these social events we are always a little apprehensive at first, feeling like the outsiders. Since we’re mostly home bodies it takes a bit to put ourselves out there, but with fellow Airstreamers there’s a quick ease that develops. After all you both have an affinity for these shiny things on wheels. The conversation usually starts with the details of your trailers (model, length, year), moves onto places to go in your trailer and just keeps flowing from there. It seems there’s no shortage of conversation once you get going.

IMG_0181
We enjoyed meeting Bruce and Denise, fellow full timers.

Each day there were several seminars. We attended sessions on proper hitching, changing a tire, tips on riveting from Airstream technicians (with an Airstream you will eventually have to rivet something—we’ve had a few rivets pop out), taking a trip to Alaska, maintaining your Zipdee awning, and so much more. Lots of good information that we wouldn’t have gotten anywhere else. Plus we made several trips to the Airstream store and came away with a few new shirts. 🙂

IMG_2587
Listening to the President of Airstream at happy hour one night.
IMG_2592
After 11 months on the road we had a few ideas to share at the manager’s product feedback session.
IMG_2612
Pilgrim performed at Open Mic night. They were part of Airstream’s Endless Caravan, traveling in an Airstream for 3 months giving free backyard concerts.

Daily happy hours meant door prizes, and we won one of the big ones, a free Zip Dee chair. Turned out that wasn’t the only luck we had during our week. The absolute highlight of our week was a private factory tour we won in a silent auction benefitting the local food bank. We toured the factory 10 years ago with our daughters on a trip to Ohio, and went on the regular tour early in the week, but this was a whole different experience.

IMG_2583
On the regular factory tour we had over 60 people with us.

It was phenominal. As Chuck says, we were both grinning ear to ear for the entire 3+ hours. Marion Slater, Director of Manufacturing graciously donated his time to take us on this comprehensive tour. He told us stories and answered our questions and let us peek in places the regular tour doesn’t go. Not once did he check the time or look at his phone. We were blown away by his graciousness with his time as well as his knowledge, pride in their product, and relationship with the production team.

IMG_0163
Private tour so much better!

Marion explained each step in the process. They begin with a chassis, add axles, wheels, water tanks, wrap the belly, and top it with a layer of Reflectix insulation (like shiny bubble wrap). At the same time another team is working on the body. A CNC machine routes the aluminum side panels which are tack riveted to the ribs and fit onto the plywood subfloor. Along with the end pieces these form a shell which is hoisted up and set on top of the chassis assembly. From there all the exterior pieces are attached, lights, vents, etc. and a team buck rivets every panel, one guy on the outside pushing the rivets in and another on the inside holding a metal buck tool which flattens the inside of the rivet. Marion let me step inside to see them in action. They can’t see or hear each other so they have to know how to work in sync and have a system of taps to communicate.

Once the outside shell is complete it is tested in a spray booth to make sure there are no leaks. Only 5 people in the company can clear a trailer to move past the water test, the 3 water test technicians, Marion, and another Director.

B0723864-F3F8-4226-A249-B6E052FC93BA
Yes, every single Airstream goes through this water test.

Next is when the inside magic begins. Wiring is run, insulation made from recycled cotton goes in, the inside aluminum walls are riveted in place, flooring is laid down, furniture is scribed and fit into place, and appliances are installed. It’s a lot of work and they do it all. From making their own cabinets to sewing the curtains. It takes 4 days from start to finish and they make about 85 units a week. With the increased popularity of Airstreams in the last few years they expanded the factory and now employ over 800. We were really impressed with the quality (from the water test to the multiple QC checks on the line, and the final check at the end) and the fact that these trailers are still handmade. There are some machines to help, but no robotic arms or conveyor belts.

One of those machines is in the original building where they have been making Airstreams since 1952. This machine forms aluminum sheets into the curved end panels that give Airstreams their rounded look. Amazingly it’s the exact same machine they’ve been using since 1952 and it’s still operated by feel, no fancy electronics here.

7D2043BB-37A0-4F42-8497-395C12322EC4
This one machine forms every curved end panel on every Airstream trailer.

We saw the Interstate (Class B van) production line and learned that they import Mercedes vans with all the top of the line safety and comfort features, including a stereo they rip out just to keep the wiring harness.

IMG_2625

The tour was quite thorough and after over 3 hours we ended up in the offices, which hide right above the production floor, and were surprised with an Airstream goodie bag. It was a great day and made the perfect early birthday present for Chuck!

F310D2CC-F586-4BEB-AD31-11AC026FFF61
“To place the great wide world at your doorstep for you who yearn to travel with the comforts of home…” -Wally Byam  Sounds like he was talking about us!
5ECC3622-ECC5-4373-8745-2FE80E2A3E44
We never stopped grinning!

All in all it was a great week. We learned a lot, made new friends, enjoyed great weather, and had a good time. Kudos to R & B events who put forth a well organized event!

IMG_2637
The sun sets on Alumapalooza 8.

Next up for us is a short drive north to Cuyahoga National Park.